Linear 84RF-184RF
Panel (Galvanized Steel):
Metalium make Round edge panels, 84mm wide x 15 mm deep x length up to 5 mtr. Formed Out of 0.45 / 0.50mm TCT Galvanized steel as per IS-513 fixed on carriers. Panel shall be powder coated / coil coated on external surface only. When two panels are to be joined, they shall be joined together by means of panel coupler suitable for 84R Panel.
Panel (Aluminium):
Metalium make Round edge panels, 84 mm wide x 15 mm deep x length up to 5 mtr. Formed out of 0.65 mm thick TCT Aluminium alloy (AA) 8011-H3 fixed on carriers. Panel shall be powder coated / coil coated on external surface only. When two panels are to be joined, they shall be joined together by means of panel coupler suitable for 84R Panel.
Paint Detail:
Coil coated panel shall be chromatized for maximum bond between metal and paint, enamelled twice under high temperature, one side with full primer and finish coat, the other side (Inner side) with a primer coating and skin coat on continuous paint line or Powder coated panel shall be 50 microns thick on exposed surface.
Perforation Pattern 1:
Combine 4mm & 2mm dia, 7mm Centre to Centre in Regular Pattern.Perforation Pattern 2: 2mm dia, 7mm Centre to Centre in diagonal Pattern.
Flush Profile Galvanized Steel / Aluminium and maximum length up to 2.4 mtr. Will be inserted in 16 mm gap between the panels.
Carrier:
Carrier shall be 20mm wide at bottom and 39 mm deep with cutouts to hold the panel in a module of 100 / 200 mm, carrier shall be roll formed out of 0.45 mm Galvanized steel and cut to a standard length of 2.4 mtr. When two or more carriers are to be joined, they shall be joined together by means of carrier coupler which will clip on to the holes in the sides of the cut carrier and hold them firmly in place while maintaining the module of 100mm /200mm centre to centre.
Installation detail:
The carrier shall be suspended from slab/truss by 4mm dia galvanized rod & height adjustment powder coated spring steel clips at maximum 1.2 to 1.5 meter centre to centre. The 4mm dia galvanized rod shall be fixed to slab by forming one end “J” shape with roll inserts.
Edge Profile
Edge profile shall be L- shaped, roll formed out of 0.5mm Galvanized steel / Aluminium strips with coil coating or powder Coating in standard colors.